SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
Conductor SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo

Conductor SA2.6 Motion Controller

$1,999.00
SKU: SA26_RSPLUS_DANA
Type:SA2.6 w/RSI and Dana Dolly Integration
Quantity:

Contact Us

eMotimo is a US based company with headquarters in San Diego, CA.

Our address is:

eMotimo Inc.
8840 Kenamar Dr. STE 403
San Diego, CA  92121
+1  415-684-8162

For sales: please reach out to us at sales@emotimo.com or 415-684-8162

For post sales support: please use our searchable knowledge base and open a ticket at https://support.emotimo.com.  You may also  send a message to help@emotimo.com to open a ticket.

Overview

The Conductor SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks like automated interviews and controlled product shots.

 

Options and Variants:

Conductor SA2.6 Basic

Bare bones for when you don't need a remote or the RSI (integration to a DJI RS Gimbal).  Comes with:

  • Conductor SA2.6 Motion Controller
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates

Conductor SA2.6 with RSI

If you want to drive the DJI gimbals for automated interviews/Product shooting, and already own a compatible slider and eMotimo integration kit, then this the kit you want.

  • Conductor SA2.6 Motion Controller
  • RSI + 6Pin RSI Cable (DJI RS2/RS3 integration dongle and cable)
  • PS4 DualShock Remote or PS5 DuelSense Remote
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates

 

Conductor SA2.6 with RSI and Dana Dolly Integration Kit

If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.

  • Conductor SA2.6 Motion Controller
  • RSI + 6Pin RSI Cable (DJI RS2/RS3 integration dongle and cable)
  • PS4 DualShock Remote or PS5 DuelSense Remote
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates
  • Dana Dolly Integration Kit

 

Conductor SA2.6 with RSI and Shark Slider Kit

If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.

  • Conductor SA2.6 Motion Controller
  • RSI + 6Pin RSI Cable (DJI RS2/RS3 integration dongle and cable)
  • PS4 DualShock Remote or PS5 DuelSense Remote
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates
  • iFootage Shark Kit with Direct Drive Motor

 

Main Controller Functions:

1- Interview Monster

Shooting interviews with motion can add tremendous production value to talking-head and narrative shoots, however, it can be technically difficult for most camera operators. By combining linear motion to gimbals, high-quality automated interviews are now easy to set up and shoot.

With the eMotimo Conductor, setting up an automated interview with motion can be achieved in as little as 15 seconds with as few as three button clicks using the single, simple interface.  No previous motion control experience necessary. 


How it works:

Combine an off the shelf DJI RS2 or RS3 gimbal with a linear solution like Dana Dolly or portable light-weight sliders, with the eMotimo 2.6.  The eMotimo Conductor SA2.6 serves as conductor between the linear motion and the gimbal to enable the operator to program simple or complex motion simply and quickly. 

 

2 - Product Monster

Adding controlled motion to any product or tabletop shoot elevates production value. But achieving these specialized motions with the correct timing and consistency takes years of practice for single operators and teams.

The eMotimo Conductor motion controller coordinates pan/tilt/roll/focus from advanced third-party gimbals, with linear motion (slider/dolly) and a product turntable. Even with 6 controllable axis, it easier than ever before to create a smooth, professional shot. 

Use the easy guided modes for quick and easy motion control, or go deeper to add 9 keyframes for fine focus and framing control. If you need even more control connect to Dragonframe software for unlimited keyframing and control for video or stop-motion shoots.

How it works:

Combine an off the shelf DJI RS2 or RS3 gimbal with a linear solution like Dana Dolly or portable light-weight sliders, with the eMotimo Conductor SA2.6 and an eMotimo turntable.  The eMotimo SA2.6 serves as conductor between the linear motion, turntable and the gimbal to enable the operator to program simple or complex motion simply and quickly. 


 

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jeffrey Holmes
Sa 2.6 Conductor and shark s1 kit

First of all i would like to say that this product is not perfect. But I am very excited about what it does do and it does well. That being said it integrates with my RS3 pro flawless and the ease of use for setting up quick shots is awesome. Granted something like a rhino that you can physically move from point to point would be quicker. Using a PS5 controller is actually quite intuitive. One complaint is i have to set the start and stop limits every time i set it up. But you have to do that each time you change to a separate motor anyways. I broke the locking art of the wire connector on the RSI that connects to the SA 2.6 within 24 hours. Much like what happens to ethernet cables a lot. So be careful. It still plugs in and works just no lock. I'd like to see just the cable for sale because of this instead of buying a new RSI. Also having 3 to 4 axis of motion from the gimbal (if you use the dji focus motor) and 3 FIZ axis if using the tilta nucleus m motors (highly recommend) and 2 extra axis of motion (if you want a slider and possibly a turntable) makes it a full motion system. I picked up a few DIY connectors to test out with other motors. You do not need the slider or a turntable you can do whatever you want if only limited by your imagination. Movements are very repeatable and with the right power supply it can run all day. Setup is not very quick depending on what you plan to use. I have the shark slider kit and if you leave it together all the time setup is quick. But if you need to make it longer you have to change the belt and that takes a few minutes. Swapping the slider motors is very quick and with the 14-1 or 21-2 geared motors you can get vertical movements by sacrificing some speed. If using a dana dolly you need to string the belt every time and there is no vertical movement. all of this can be done without connecting to a computer and it feels like im not locked into a single ecosystem.

Though I really love this product it can use a few upgrades. A more robust connection for the RSI, More ports for more motors and axis to control, Someway to remap the controller buttons, flipping the screen on the sa 2.6 does not invert the joystick on it ( so now up is down and vice versa), I cant figure out how to control the 3rd tilta motor (though i may never need to) because its not mapped to the controller.

Overall I'm more excited about what this can be. Especially a V2. A firmware update could fix a few things, an expansion module to add in more axis of movement for DIYers, it needs more screw holes and possibly a place to mount a battery or a custom sled to mount to the shark slider.

M
Mark @ Manhattan Beach Studios
Super Versatile

I have used Emotimo gear for many years - since it's very first timelapse controller and almost every product since. This is a product we very much needed and will allow us to do a very wide range of automation techniques. Wonderful tool!