SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo
SA2.6 Motion Controller - eMotimo

Conductor SA2.6 Motion Controller

Sale price$1,999.00
SKU: SA26_RSPLUS_DANA
Type:SA2.6 w/RSI and Dana Dolly Integration
Quantity:

Contact Us

eMotimo is a US based company with headquarters in San Diego, CA.

Our address is:

eMotimo Inc.
8840 Kenamar Dr. STE 403
San Diego, CA  92122
+1  415-684-8162

For sales: please reach out to us at sales@emotimo.com or 415-684-8162

For post sales support: please use our knowledge base and open a ticket at https://support.emotimo.com or send a message to help@emotimo.com

Overview

The Conductor SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks like automated interviews and controlled product shots.

 

Options and Variants:

Conductor SA2.6 Basic

Bare bones for when you don't need a remote or the RSI (integration to a DJI RS Gimbal).  Comes with:

  • Conductor SA2.6 Motion Controller
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates

Conductor SA2.6 with RSI

If you want to drive the DJI gimbals for automated interviews/Product shooting, and already own a compatible slider and eMotimo integration kit, then this the kit you want.

  • Conductor SA2.6 Motion Controller
  • RSI + 6Pin RSI Cable (DJI RS2/RS3 integration dongle and cable)
  • PS4 DualShock Remote or PS5 DuelSense Remote
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates

 

Conductor SA2.6 with RSI and Dana Dolly Integration Kit

If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.

  • Conductor SA2.6 Motion Controller
  • RSI + 6Pin RSI Cable (DJI RS2/RS3 integration dongle and cable)
  • PS4 DualShock Remote or PS5 DuelSense Remote
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates
  • Dana Dolly Integration Kit

 

Conductor SA2.6 with RSI and Shark Slider Kit

If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.

  • Conductor SA2.6 Motion Controller
  • RSI + 6Pin RSI Cable (DJI RS2/RS3 integration dongle and cable)
  • PS4 DualShock Remote or PS5 DuelSense Remote
  • DTAP to 2.1mm locking power cable
  • 12VDC 2.0A Wall Supply
  • MicroSD card for firmware updates
  • iFootage Shark Kit with Direct Drive Motor

 

Main Controller Functions:

1- Interview Monster

Shooting interviews with motion can add tremendous production value to talking-head and narrative shoots, however, it can be technically difficult for most camera operators. By combining linear motion to gimbals, high-quality automated interviews are now easy to set up and shoot.

With the eMotimo Conductor, setting up an automated interview with motion can be achieved in as little as 15 seconds with as few as three button clicks using the single, simple interface.  No previous motion control experience necessary. 


How it works:

Combine an off the shelf DJI RS2 or RS3 gimbal with a linear solution like Dana Dolly or portable light-weight sliders, with the eMotimo 2.6.  The eMotimo Conductor SA2.6 serves as conductor between the linear motion and the gimbal to enable the operator to program simple or complex motion simply and quickly. 

 

2 - Product Monster

Adding controlled motion to any product or tabletop shoot elevates production value. But achieving these specialized motions with the correct timing and consistency takes years of practice for single operators and teams.

The eMotimo Conductor motion controller coordinates pan/tilt/roll/focus from advanced third-party gimbals, with linear motion (slider/dolly) and a product turntable. Even with 6 controllable axis, it easier than ever before to create a smooth, professional shot. 

Use the easy guided modes for quick and easy motion control, or go deeper to add 9 keyframes for fine focus and framing control. If you need even more control connect to Dragonframe software for unlimited keyframing and control for video or stop-motion shoots.

How it works:

Combine an off the shelf DJI RS2 or RS3 gimbal with a linear solution like Dana Dolly or portable light-weight sliders, with the eMotimo Conductor SA2.6 and an eMotimo turntable.  The eMotimo SA2.6 serves as conductor between the linear motion, turntable and the gimbal to enable the operator to program simple or complex motion simply and quickly. 


 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mark @ Manhattan Beach Studios
Super Versatile

I have used Emotimo gear for many years - since it's very first timelapse controller and almost every product since. This is a product we very much needed and will allow us to do a very wide range of automation techniques. Wonderful tool!