eMotimo Spectrum ST4 DIY Motor Port Connector Set - exploded view
eMotimo Spectrum ST4 DIY Motor Port Connector Set - assembled view
Spectrum ST4 DIY Motor Port Connector Set - Diagram

Spectrum and Conductor DIY Motor Port Connector

$9.99 $12.99
Save $3.00
SKU: ST4_MAC_MPC
Quantity:

Contact Us

eMotimo is a US based company with headquarters in San Diego, CA.

Our address is:

eMotimo Inc.
8840 Kenamar Dr. STE 403
San Diego, CA  92121
+1  415-684-8162

For sales: please reach out to us at sales@emotimo.com or 415-684-8162

For post sales support: please use our searchable knowledge base and open a ticket at https://support.emotimo.com.  You may also  send a message to help@emotimo.com to open a ticket.

Conductor and Spectrum DIY Motor Port Connector is for connecting your bipolar (4-wire) stepper motor to the plugs that the Conductor and Spectrum uses for its powered motor ports. Be aware that SOLDERING IS REQUIRED!!! Solder wiring to connector using 4 solder cups at the backside of connector.

*Note that this includes the male pin portion shown below.  It does not include a mating connector (that part is already on your spectrum or conductor's M ports.

If you want both sides, purchase an extension cable from us and cut it.

If you want to source these adapters yourself, and can find stock, the manufacturer is Chogori and the part number is 21004111-01

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Clement
Worked perfectly!

Used these to make cables for motors I already had to connect to the ST4. Quality connectors, soldered up easily. The one thing that I wish is that eMotimo offered a solderless version of this connector similar to the M8/IP67 connectors I have been using for other projects. They make field repairs a snap - no soldering required.