Your Cart is Empty
ST4MAC_FZ_RC
$399.00
The eMotimo Fz motor is light, elegant, powerful, and is the perfect addition to your spectrum ST4. The Fz mounts easily to a 15 mm rail system (yours if you have one, or add the optional integrated Lplate). No new controller is required – just plug it in to the spectrum’s M4 motor port and your focus is ready for live or programmed moves coordinated with your other controlled axis.
The small form factor and light motors means you can add one or two of our Fz motors to your spectrum system without creating a monster.
Fz Motor Rail Clamp includes
1. Fz motor with 12.5 inch cable to spectrum plug
2. 55 tooth 0.8Mod gear (standard pitch)
3. Rail clamp and hardware for mounting to eMotimo's Universal L-Bracket
4. 15mm aluminum rod (5.5 inches or 141 mm long)
#1 Spectrum ST4: Spectrum ST4 controls and powers all 4-axis of motion at the same time.
#2 PS4 controller: The PS4 controller is included in every spectrum purchase. This control is great for wirelessly controlling 4 axis of motion precisely, intuitively, and simultaneously.
#3 Arca compatible L-brackets: To mount your camera to spectrums arca compatible tilt clamp, you will need to first mount your camera to an arca compatible L-bracket.
#4 Arca compatible clamps (ballheads, or monopod heads): Spectrums base comes with an arca plate mounted to the pan axis. You will need to lock it down by using an arca compatible clamp on your tripod or slider. For greater adjustability, mount spectrum to a ballhead or monopod head. These are great if you’ve moving up a slope on your slider and need to level spectrum, if you want to raise your spectrum up to avoid any interference, or for leveling on a tripod.
#5 Focus Fz & Integrated L-Bracket: Mount focus Fz to a 15mm rod. If you pick up our Fz + heavy duty L-bracket+ rail + clamp this is included and mounts to the end of the L-Bracket.
#6 spectrum ST4 / Dana Dolly Bundle
#7 spectrum ST4 / Shark Run & Gun Bundle: Mount your spectrum directly the the carriage on your shark slider and have spectrum control your linear motion.
#8 Tripod: Mount spectrum for panning and tilting to a tripod using an arca compatible clamp.
#9 eMotimo cart: Mount spectrum to the eMotimo cart by using a monopod head or ballhead.
#2 Camera shutter cable: Included with a spectrum purchase and sold separately. The camera shutter cable connects from spectrums camera port to your cameras shutter port. Spectrums built-in intervalometer will send a signal to trigger your camera to fire for SMS (shoot-move-shoot) timelapse shots using this cable.
#3 PS4 controller: Your PS4 controller connects to spectrum using the bluetooth dongle. Make sure this dongle is fully inserted before connecting your remote. Extra dongles can be found here.
#4 SD card - Firmware: An SD card is included in every spectrum ST4 purchase. Download new firmware from our site here, copy onto this card, insert into spectrum, and power on your unit to update your firmware.
#5 Power - 12-24V: Using the included AC adapter or an external battery, power your spectrum ST4 using the following specs: 12-24V. Minimum 2A. 3.5A preferred. Connector: 2.1mm x 5.5mm x 12mm circular barrel connector – center positive.
#6 Focus Fz (M3 or M4 port): Focus Fz’s primary motor port is M4. However, you can use two Fz units with spectrum and in this configuration you can use the M3 motor port for your second Fz unit.
#7 Slider: Your slider’s primary motor port is M3.
#8 Cart: Your cart’s primary motor port is M3.
#9 Turntable: Your turntable’s primary motor port is M3.
#10 External trigger: The spectrum’s i/o port is used for like external triggering or serial communication to external devices.
#11 future: USB port – future functionality – Powering the spectrum for motor moves from any USB port is not supported.
